High-power electric boiler heating element with 1.5 inch threaded connection, 6000W / 6 kW total output, 230/380V supply, approximately 300 mm active length and brass construction. Designed for fast water heating in large electric boilers, hot water tanks, buffer vessels and compatible professional or industrial systems.

Main technical specifications:

- Thread: 1.5 inch
- Total power: 6000W / 6 kW
- Supply: 230/380V
- Active length: approximately 300 mm
- Body / connection material: brass
- Product type: tubular electric boiler heating element
- Application: water heating
- Installation: threaded
- Suitable for large boilers, hot water tanks, buffer vessels and professional installations
- SKU: RM-BOILER-AL-300-6000W-112
- Available from stock
- Fast dispatch

The 6000W output provides high heating capacity and makes this model suitable for applications where standard 2000W, 3000W or 4500W heating elements are not sufficient. Its 6 kW capacity supports faster water heating when the tank and electrical installation are correctly designed.

The 1.5 inch threaded connection is widely used in boilers, tanks and buffer vessels. The existing connection should always be verified before ordering, as mechanical compatibility depends primarily on the thread size and type.

The approximately 300 mm active length makes this model suitable for many tanks where compact dimensions and high heating power are both required. Available internal space should be checked to prevent contact with the tank wall, internal coil or other components.

The brass construction provides a robust threaded mounting solution and is commonly used in water-heating applications because of its good machinability and mechanical strength.

Typical applications include:

- large electric boilers;
- hot water storage tanks;
- buffer tanks;
- bivalent tanks;
- heat pump storage tanks;
- solar hot water tanks;
- commercial installations;
- hotels and guesthouses;
- restaurants and professional kitchens;
- laundries;
- sports and changing facilities;
- commercial buildings;
- industrial installations;
- process-water heating systems.

Electric boiler brand compatibility:

Suitable as a replacement heating element for technically compatible boilers, tanks and buffer vessels from brands including Ariston, Tesy, Eldom, Ferroli, Atlantic, Bosch, Gorenje, Drazice, Hajdu, Austria Email, Thermex, Vaillant, Viessmann, Stiebel Eltron, A.O. Smith, NIBE, Electrolux, Midea, Haier, Rheem, Rinnai, Baxi, De Dietrich, Chaffoteaux, Cointra, Aparici, Fleck, Regent, Teka, Saunier Duval, Tatramat, Dimplex, Fornello, Nobel, Omega, Uniline and other brands using matching technical specifications.

Compatibility must not be determined by brand alone. Before ordering, verify the 1.5 inch thread, 6000W output, 230/380V supply, approximately 300 mm active length, element diameter, available internal tank space and the actual electrical configuration of the heater.

At 6 kW, the electrical installation must be correctly sized. Cable cross-section, protective devices, contactor, thermostat and independent over-temperature protection should be selected according to the actual load and wiring arrangement.

This model is suitable both for replacing a failed element and for building or upgrading a higher-power water-heating system.

Available from stock through RezistenteMag.ro with fast dispatch to Romania, EU countries and other supported European destinations.