Electric boiler heating element

2000W 230V electric boiler heating element with a 1 1/4" threaded connection, 350 mm length and AISI 304 stainless steel construction, designed for heating water in boilers, storage tanks and hot-water systems.

This model is a practical choice for applications where a stainless steel boiler heating element is preferred over a standard brass version. AISI 304 stainless steel is widely used for water-heating applications thanks to its good corrosion resistance, durability and reliable performance under normal operating conditions.

With a rated output of 2000W, the element provides balanced water heating without placing the same electrical demand on the installation as higher-power heaters. The 230V supply makes it suitable for correctly sized single-phase electrical systems.

The 350 mm / 35 cm length provides a useful heat-transfer surface while remaining compact enough for many standard boilers and water tanks. The 1 1/4" threaded connection allows installation in equipment fitted with the same thread size.

Before ordering, check the three key specifications: 1 1/4" thread, 350 mm length and 230V supply voltage.

Technical Specifications

• Product type: Electric boiler heating element
• Power: 2000W / 2 kW
• Voltage: 230V
• Length: 350 mm / 35 cm
• Thread: 1 1/4"
• Material: AISI 304 stainless steel
• Installation: Threaded
• Heating medium: Water
• Application: Boilers and water tanks
• Electrical supply: 230V single phase

Why Choose an AISI 304 Stainless Steel Boiler Heating Element?

The sheath material is important because the heating element works in direct contact with water.

AISI 304 stainless steel is commonly used for electric heating elements because it combines good corrosion resistance, temperature resistance and mechanical durability.

For standard water-heating applications, it is a practical material for boilers and tanks used in residential, commercial and professional installations.

For water with very high chloride content, chemically aggressive water or special process liquids, the heater material should be selected according to the actual operating conditions.

Where Can It Be Used?

This 2000W 230V heating element with 1 1/4" thread can be used in:

• electric boilers;
• hot-water storage tanks;
• water accumulators;
• domestic hot-water systems;
• hotels and guesthouses;
• restaurants;
• commercial kitchens;
• changing rooms and commercial facilities;
• various professional water-heating systems.

Compatibility should always be checked by dimensions and technical specifications, not only by the boiler brand.

2000W – A Practical Power Rating for Water Heating

A 2 kW heating element is a common choice for boilers and tanks where a good balance is required between heating time and electrical power consumption.

Actual heating time depends on several factors, including water volume, starting temperature, target temperature and heat losses from the tank.

When replacing an existing heating element, it is normally best to keep the original power rating unless the electrical installation and application have been checked for a different wattage.

What Should Be Checked Before Ordering?

Thread Size

This model uses a 1 1/4" threaded connection. Check the existing connection on the boiler or tank.

Length

The heating element is approximately 350 mm / 35 cm long. Make sure there is sufficient internal space inside the tank.

Voltage

This model is designed for 230V operation.

Power

The nominal power is 2000W.

Material

The heating element is manufactured from AISI 304 stainless steel and is intended primarily for water-heating applications.

Cannot Find the Exact Model You Need?

Not every boiler uses the same thread, length or power rating.

If the required model is not available in the standard range, we can also manufacture custom boiler heating elements according to the application.

For identification, you can send:

• a photo of the existing heater;
• overall length;
• thread size;
• voltage;
• power;
• available dimensions inside the tank.

Custom versions can be produced with different lengths, power ratings, voltages, materials and connection types.