High-power electric boiler and water-tank heating element with a standard 2 inch threaded connection, 7500W / 7.5 kW output and approximately 350 mm / 35 cm length. Made in the European Union and designed for fast water heating in large boilers, hot water tanks, buffer vessels and compatible commercial or industrial installations.

Main technical specifications:

- Thread: 2 inch
- Power: 7500W / 7.5 kW
- Length: approximately 350 mm / 35 cm
- Product type: tubular electric boiler and tank heating element
- Application: water heating
- Installation: threaded
- Manufacturing: European Union
- Suitable for boilers, tanks, buffer vessels and professional systems
- Continuous-operation capability according to the product presentation
- SKU: TM0105009050
- Limited availability / available to order depending on stock
- Fast order processing

The 7500W output makes this model suitable for systems requiring rapid heat-up and faster temperature recovery. Compared with 2000W, 3000W, 4500W or 6000W heaters, its 7.5 kW capacity can reduce heating time when the tank and electrical installation are designed for this load.

The 2 inch threaded connection is an important selection criterion. This fitting is used on certain large-capacity boilers, technical tanks, buffer vessels and professional installations. The existing threaded port should always be measured and verified before ordering.

The approximately 350 mm length must be checked against the available internal tank space. The element should not contact the tank wall, internal coil, anode or other components.

Typical applications include:

- large electric boilers;
- hot water storage tanks;
- buffer tanks;
- heat pump storage tanks;
- solar hot water tanks;
- electrical backup heating;
- hotels and guesthouses;
- restaurants and professional kitchens;
- laundries;
- commercial buildings;
- industrial installations;
- compatible technical and process-water heating systems.

European Union manufacturing and robust construction position this heater for professional use and applications where reliability and high heating capacity are important.

Boiler and tank brand compatibility:

Suitable for technically compatible equipment from brands including Ariston, Tesy, Eldom, Ferroli, Atlantic, Bosch, Gorenje, Drazice, Hajdu, Austria Email, Thermex, Vaillant, Viessmann, Stiebel Eltron, A.O. Smith, NIBE, Electrolux, Midea, Haier, Rheem, Rinnai, Baxi, De Dietrich, Chaffoteaux, Cointra, Aparici, Fleck, Regent, Teka, Saunier Duval, Tatramat, Dimplex, Fornello, Nobel, Omega, Uniline and other brands or tanks using matching technical specifications.

Brand alone does not guarantee compatibility. Before ordering, verify the 2 inch thread, 7500W output, approximately 350 mm length, nominal voltage and actual electrical configuration, element dimensions and available internal tank clearance.

IMPORTANT: the product page confirms 7500W output, 2 inch thread and 35 cm length but does not specify the nominal voltage. Voltage is therefore not assumed in this listing. The rated voltage and terminal configuration must be verified on the physical product or technical documentation before energising.

At 7.5 kW, the electrical installation must be correctly sized. Cables, circuit protection, contactors, thermostat and independent over-temperature protection must be selected by qualified personnel for the actual electrical configuration.

Available through RezistenteMag.ro for customers in Romania, EU countries and other supported European markets, with fast order processing.