Premium high-power electric boiler and water-tank heating element rated at 7500W / 7.5 kW, with a 2 inch stainless steel threaded flange, 300 mm / 30 cm length and heavy-duty Ø10 mm tube. Its robust construction, stainless flange and high corrosion resistance make it suitable for large boilers, hot water tanks, buffer vessels and compatible professional or industrial water-heating systems.

Main technical specifications:

- Power: 7500W / 7.5 kW
- Thread / flange: 2 inch
- Flange material: stainless steel
- Length: 300 mm / 30 cm
- Tube diameter: Ø10 mm
- Construction: thick heavy-duty tube
- High corrosion resistance
- Product type: electric boiler and tank heating element
- Main application: water heating
- Installation: threaded
- Suitable for commercial, professional and industrial use
- Robust construction for frequent and extended operating cycles

The 7500W output provides high heating capacity and is suitable for compatible boilers and tanks requiring faster water heating or more installed power than standard 3000W, 4500W or 6000W elements.

The 2 inch stainless steel threaded flange is one of the main advantages of this model. Stainless steel contributes to good corrosion resistance and supports use in applications where durability, stability and extended operating life are important.

The thick Ø10 mm tube provides a robust mechanical construction compared with lightweight heating elements with smaller tube diameters. This heavy-duty configuration is suitable for professional applications, frequent heating cycles and intensive use.

The 300 mm / 30 cm length provides a compact configuration for a 7.5 kW heater. Internal clearance must be checked before installation so the element does not contact the tank wall, internal coil, anode or other components.

High corrosion resistance makes the product suitable for many water-heating applications. For water with high chloride content, high salinity, chemicals or special process conditions, material compatibility must be evaluated separately.

Typical applications include:

- large electric boilers;
- hot water storage tanks;
- buffer tanks;
- technical tanks;
- heat pump storage tanks;
- solar hot water tanks;
- electrical backup heating;
- hotels and guesthouses;
- restaurants and professional kitchens;
- laundries;
- commercial buildings;
- compatible professional and industrial installations.

Boiler and tank compatibility:

Suitable as a replacement heating element for technically compatible equipment from brands including Ariston, Tesy, Eldom, Ferroli, Bosch, Atlantic, Gorenje, Drazice, Hajdu, Austria Email, Thermex, Vaillant, Viessmann, Stiebel Eltron, A.O. Smith, NIBE, Electrolux, Midea, Haier, Rheem, Rinnai, Baxi, De Dietrich, Chaffoteaux, Cointra, Aparici, Fleck, Regent, Teka, Saunier Duval, Tatramat, Dimplex, Fornello, Nobel, Omega, Uniline and other boiler or tank brands using matching technical specifications.

Brand alone does not guarantee compatibility. Before ordering, verify the 2 inch thread, 7500W output, 300 mm length, Ø10 mm tube diameter, nominal voltage, electrical configuration, connection dimensions and available internal tank clearance.

At 7.5 kW, the electrical installation must be correctly sized. Cable cross-section, protective devices, contactors, thermostat and independent over-temperature protection should be selected according to the actual voltage and wiring configuration.